16" Hydraulic Stump Grinder for Mini Skid Steer w/ Swing Cylinder

The S16 Skidsteer stump grinder features a specially designed electric actuator that controls the swing of the stump grinder. Equipped with high-performance electric linear actuators (12VDC) and limit switches, the actuator body is made of 304 stainless steel and has an IP69 rating. What sets this stump grinder apart is that it both has side to side swing and all the hydraulic oil from the mini skidsteer goes to the cutting head, the side-to-side swing is powered electronically, which greatly improves overall efficacy. The stump grinder's rotor has double-side tooth setup that speeds up the grinding process, with each tooth only needing to make a small cut thanks to the high number of teeth. This means the teeth last longer and usually only require 2 or 3 replacements at a time. The stump grinder can cut up to 6 inches below ground with a swing radius of 58 degrees. The concave-shaped carbide tip of the high-speed teeth provides aggressive cutting action by chipping the brush bit by bit. The S16 model is ideal for mini skidsteer stump grinding on close-cut grass because the unit can sit stationary as the head swings from side to side.